The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson DC17 (USA) How does the upright microswitch sit inside LMC Motor housing?  (Read 8938 times)

Offline mancalvo1

  • Member
  • Posts: 3
Dyson DC17 (USA)

1. How does the upright micro-switch sit inside LMC Motor housing? I want to replace the switch, but I need a picture to show the position and location inside the motor housing.. Cheap help took it apart and now I need to put it back together >:( the exploded diagram does not show the exact location and orientation.

Thanks!

Manolo

Offline mancalvo1

  • Member
  • Posts: 3
I figure it out.. I don't need any help for right now.. The upright micro switch gets inserted into a cavity of the lower motor housing cover and onto the side of the plastic actuator. the wires are tucked into the routing slots, which hold the wires in place.

Offline mancalvo1

  • Member
  • Posts: 3
Correction: upper housing cavity since you will be working with the pre-filter cover sitting on top of the table and the hose/arm hanging down towards the floor. The pre-filter cover is flat and therefore is stable when working on this area.

DC14 Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram