Author Topic: noisy brush (Read 6381 times)

carlos · « **on:** October 31, 2012, 06:24:51 pm »

hi dyson buds
have yellow dc07 brush roller seems to be rubbing is this because the plastic mount has worn down
thank you
carlos

MVacs · « **Reply #1 on:** October 31, 2012, 06:38:22 pm »

Remove it and spin it between your hands. Is it still rubbing? Does it spin freely? Is it bent?

carlos · « **Reply #2 on:** October 31, 2012, 06:59:30 pm »

hello
brush is ok have noticed mount were brush sits near belt is worn down is this common prop with age do you think

MVacs · « **Reply #3 on:** November 01, 2012, 01:04:09 am »

hello
brush is ok have noticed mount were brush sits near belt is worn down is this common prop with age do you think

With respect, could you say that again in English please?

carlos · « **Reply #4 on:** November 01, 2012, 06:58:45 am »

lol
as you know the brush bar sits in its brackets. were the belt goes there is a support it is very worn does this make sense
thanks

MV Claire · « **Reply #5 on:** November 01, 2012, 02:07:23 pm »

Hello Carlos. Sounds like you need a new brush bar and and housing. You can get them from here: https://manchestervacs.co.uk/Dyson/DC07-spares.html

carlos · « **Reply #6 on:** November 27, 2012, 07:24:37 pm »

thank you
yes you are right i do need new housing as the old one has worn down

News: