The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC19 cable reel  (Read 4328 times)

Offline buckydee

  • Member
  • Posts: 1
DC19 cable reel
« on: February 03, 2013, 04:01:21 am »
Hi,

I have a DC19 animal, about 2 years old and bought in the UK. We emigrated to Australia and whilst changing the plugs, I accidentally reeled the cable in. Unsurprisingly, without the plug to stop it, the whipped round several times and whilst i managed to get the end out, the retraction mechanism will only retract the cable in so far, leaving about half a metre outside.

I need to get to the mechanism to wind it back several times to undo the over rotation it did when the plug wasn't on, but I'm not sure how to do get to it. Only been able to access two screws on the body which appear to do nothing so I'm guessing I'll need to take the wheels off, but don't want to break them.

Any pointers would be gratefully received! Thanks :)

Offline bluebumble485

  • Member
  • Posts: 386
  • Country: gb
  • Gender: Male
Re: DC19 cable reel
« Reply #1 on: February 03, 2013, 09:09:24 am »
hi 2 screws each side screw driver ease wheel out you will see screws
i put screwdriver by screws on the case short sharp the wheels are off
good luck

Dyson Cylinder Spare Parts


 

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram