Hi Everyone,
Hope someone can help?
New to the forum, but had the DC01 since they were on the market and purchased the CR 01 as soon as they were available.
Our original CR 01 received a replacement drum, various other parts until eventually the nice man from Dyson told us that the bearings had gone and it was time for it to head for the recycling plant in the sky! he even arranged for the machine to be collected by Dyson for the final journey. But not before I stripped a few parts as I managed to pick up one from Ebay that was not wanted and fully functional, still got it and still going strong.
However we moved home recently and I`ve acquired an additional CR 01, newer but had issues with the lcd display. Undeterred, bearing in mind the spares from the original, I replaced the main board, got the display up and running, outer door lock not shut, no problem swapped the outer door catches (these are still available anyway), got the machine to rinse and spin, so far so good, time for a wash cycle. Keep getting the F15 fault code!
I`ve done the diagnostic check and got 2255F15F6F15V131,
Keep clearing and trying again, sometimes get the "not filling" but restarts easy enough.
Any tips or thoughts,
I`ve got plenty of enthusiasm just need pointing in the right direction, be a shame to send this one off to the recycling centre!
Thanks in anticipation,
Tony.