Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Dyson DC14, DC17, DC27, DC28 and DC33 => Topic started by: GG1 on May 05, 2022, 10:21:46 pm

Title: Resistor for PCB for DC24 Cleaner head
Post by: GG1 on May 05, 2022, 10:21:46 pm

Does anyone what kind of resistor this is.? I need to replace it.

I was going to use this

https://www.jaycar.com.au/18k-ohm-1-watt-carbon-film-resistors-pack-of-2/p/RR2804

Title: Re: Resistor for PCB for DC24 Cleaner head
Post by: Prestbury Vac Repairs on May 07, 2022, 05:08:29 pm

I can’t see what the coloured bands are so can’t tell you the value . Just download a resistor  band chart enter the colours gold or silver band will be the last colour.
It’s hard to say what the wattage is 1 watt is probably ok .

Title: Re: Resistor for PCB for DC24 Cleaner head
Post by: GG1 on May 07, 2022, 10:35:21 pm

The only thing I am unsure of is the wattage

Title: Re: Resistor for PCB for DC24 Cleaner head
Post by: ryevac on May 10, 2022, 09:58:54 am

I thought they were 2.5 watt?
Best method is to measure them and compare with replacements spec.

They normally go open circuit when head motor is near the end of its life.