Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Second Generation "The Ball" Dysons. => Topic started by: theheadschoice on April 13, 2016, 02:03:04 am

Title: How do I pull the side off a Dyson Ball? (DC40 and Cinetic Big Ball)
Post by: theheadschoice on April 13, 2016, 02:03:04 am
Hello everyone! I've no idea how to pull the side off one of these Dyson Cinetic Big Ball machines to clean the filter. I also have a dc40 that just came in as well I need to pull the machine's right side off to try and find a mysterious wire.. not sure how to approach this and need to be sure not to break them!

Any guidance would be greatly appreciated. Thank you in advance for your time and any considerations.
Title: Re: How do I pull the side off a Dyson Ball? (DC40 and Cinetic Big Ball)
Post by: heidi on April 13, 2016, 02:17:55 am
  Okay so the screw you just removed is it all you need to do now is just pull it off. Hope this helps
Title: Re: How do I pull the side off a Dyson Ball? (DC40 and Cinetic Big Ball)
Post by: heidi on April 13, 2016, 02:28:03 am
 In person I find it incredibly easy take apart the new ones but it's hard to explain  how to do it without a video or something sorry.
Title: Re: How do I pull the side off a Dyson Ball? (DC40 and Cinetic Big Ball)
Post by: theheadschoice on April 13, 2016, 10:04:02 pm
Ok thank you! I just didn't want to yank it off and break it into pieces!!! (happened before with other machines I thought pulled apart)