Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Other Vacuum Cleaners & Site Suggestions => Vintage Vacuum Cleaners & Appliances => Topic started by: clive1954 on November 21, 2018, 09:51:36 PM

Title: Vintage Hoover Junior 375 spares
Post by: clive1954 on November 21, 2018, 09:51:36 PM
Hello,
I have two Pre war Hoover 375's both needing belts,
and ideally beater brushes.
I could get belts off Ebay up to a few years ago,but now cannot find anyone doing them.
Does anyone know of a supplier for belts ?
or does anyone have any belts or brushes I could purchase ?
Many Thanks...
Title: Re: Vintage Hoover Junior 375 spares
Post by: MVacs on November 22, 2018, 04:32:28 PM
Anyone know the part number for the brushes? We might have some......

Beko will know which belts they use. They'll be available.

Title: Re: Vintage Hoover Junior 375 spares
Post by: clive1954 on November 25, 2018, 01:51:35 PM
Thanks for that,
I don't know the brush number but they are the type held in place by a single screw,when you say Beko will know about the belts, I don't quite follow...Sorry..
Regards Clive.
Title: Re: Vintage Hoover Junior 375 spares
Post by: Madrat on November 25, 2018, 04:43:47 PM
lol Beko is a member on here that knows everything.
Title: Re: Vintage Hoover Junior 375 spares
Post by: MVacs on November 26, 2018, 02:53:48 PM
lol Beko is a member on here that knows everything.

He is MIA - I'll send him an email.
Title: Re: Vintage Hoover Junior 375 spares
Post by: beko1987 on December 12, 2018, 12:14:09 AM
I'm here! Sorry, very busy at work, I've fallen asleep putting the kids to bed the last few weeks!

Mr Clive, I have replied to your email a few days ago but not sure if you have seen it, the 375 belts are actually quite rare, however I posted the question in a facebook group I am a member of, where us sad vacuum cleaner collectors hang out and many members have sets they would be willing to sell, but I'd need permission to pass your contact details on for that

Or... https://blackwellanddenton.com/product/vacuum-cleaner-drive-belts-twin-pack-hoover-375/?fbclid=IwAR2g0DiZcV-4jVaawLfQcEcLQ5PXWdENwhfpigASblXBsA4N8_Whtoc0P1w and I strongly recommend picking up a set of brand new brushroll bearings from Manchestervacs (PM Mvacs as I doubt he has them on the shop, their not *whisper* sebo parts... And I can almost guarantee you will need them if you've not replaced them already within the last two decades! I can point you towards a guide to doing it if you need!
Title: Re: Vintage Hoover Junior 375 spares
Post by: clive1954 on December 12, 2018, 11:39:43 PM
Hi many thanks got getting back to me.
Im gonna phone bradwell and denton ( will keep you informed)
Best regards Clive,. :tiphat: