Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Dyson DC07 => Topic started by: Tavolaro on April 13, 2011, 03:50:33 PM

Title: DC07 Brush Bar Change Instructions?
Post by: Tavolaro on April 13, 2011, 03:50:33 PM
Can anyone send or direct me to instructions for changing a DC07 Animal (with clutch) Brush bar. Standard video does not address clutch model variation on releasing drive belt.
Title: Re: DC07 Brush Bar Change Instructions?
Post by: Dyson Tech on April 13, 2011, 04:56:15 PM
See if this helps:
I can answer any other questions you have after watching that video. (Its not our video by the way, and he doesn't rush, but it covers a clutch swap).
Title: Re: DC07 Brush Bar Change Instructions?
Post by: Tavolaro on April 13, 2011, 06:15:41 PM
Video was very helpful for brush bar removal and interesting for clutch change.. It removed my concerns about handling brush bar removal too aggressively. Thanks.
Title: Re: DC07 Brush Bar Change Instructions?
Post by: MVacs on April 22, 2011, 10:34:22 AM
It must be said of the video though, the brush roll housing is not to be separated by stuffing a big screwdriver between it and the main body and swinging on it.  :o

Tilting it back and forth in situ whilst gently pulling it will reveal the position it must be in to come apart.