Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Dyson DC07 => Topic started by: Dyson Tech on January 10, 2011, 11:45:45 pm
-
I just dug out of my old files a set of DC07 exploded drawings that may be useful to some of you guys.
To our viewing guests: You need to be signed into the forums to see images. You can make a free account here: Join the Dyson forums (https://manchestervacs.co.uk/DysonForum/index.php?PHPSESSID=c22740086cae65628c808d1fa5f6d327&action=register)
Here is the first one: The DC07 brush roll, clutch and base housing assemblies.
[attachimg=1]
-
Here is the second one: The DC07 Cyclone Assembly
[attachimg=1]
-
Here is the third one: The DC07 motor housing assembly.
[attachimg=1]
-
Here is the fourth one: The DC07 chassis, frame, switch and electrical assemblies.
[attachimg=1]
-
Here is the fifth one: The DC07 wand, back hose and accessories
[attachimg=1]
-
Hi,
Don't suppose you hvae the numerical key for this anywhere do you?
Thanks
-
Probably not. Which part do you need?
-
Nothing in particular, I just have one in pieces!!!
The drawings help a lot so cheers for that!
-
nice! similar enough to the US model I think.
-
nice! similar enough to the US model I think.
The US models only differ by having a slightly larger brush roll housing and sole plate that I recall. The construction is the same; the drawings are likely the same over the pond.
Welcome to the site Maxnort. :tiphat:
-
Hi Maxnort. Good to have you on the site! ;)
-
Excellent diagrams, should help me put my DC07 animal back together after being in pieces for 3 years now!
-
[attachimg=1]
I exploded a DC07 Origin earlier before putting it together! All that's missing from this picture is the cable, which I need to get from the loft as the one on it was ruined!
The Origin does not have brush control, so no clutch.