Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Cylinder & Canister Dysons => Topic started by: gerdivinia on December 29, 2011, 09:22:25 pm

Title: How to exchange the switch in the DC08?
Post by: gerdivinia on December 29, 2011, 09:22:25 pm

Can somebody explain how to open the DC08

Title: Re: How to exchange the switch in the DC08?
Post by: Dyson Tech on December 31, 2011, 04:53:45 pm

Here goes:

Start by removing the wheels, they just pull off with your fingers:

[attachimg=1]

Then undo this screw:

[attachimg=2]

Title: Re: How to exchange the switch in the DC08?
Post by: Dyson Tech on December 31, 2011, 04:55:12 pm

Then undo the screws here:

[attachimg=1]

here:

[attachimg=2]

and here:

[attachimg=3]

Title: Re: How to exchange the switch in the DC08?
Post by: Dyson Tech on December 31, 2011, 04:58:00 pm

The machine will now come apart like so:

[attachimg=1]

The switch is here:

[attachimg=2]

and when you refit the case, you must lift the motor housing in order that it clips home properly by levering it up a little with a screwdriver like so.

[attachimg=3]

Title: Re: How to exchange the switch in the DC08?
Post by: gerdivinia on December 31, 2011, 05:24:18 pm

Great instruction,
I thank you very much !

Gerdivinia.