Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Dyson DC14, DC17, DC27, DC28 and DC33 => Topic started by: bomski on November 05, 2012, 01:27:31 pm
-
howdy!
After doing some hoovering at the weekend I went to use the hose and its assembly; i disconnected the long reach part from the main hose and this white ring (see attachment below) fell out:
I've tried to find where this came from online; the only identifying mark is a Dyson logo and the letters '1A' written on it.
Can anyone tell me where this actually goes? a pic of its original location would be very helpful!
Thanks!
-
I think that's from inside the wand. I'll double check with our tech tomorrow and post a photo of where it goes.
-
Here is a photo of where a part similar to that goes on a DC14 wand.
[attachimg=1]
However, on the DC33's we have here, they have a different one. But you may have a different version, check that area first.
-
thanks so much for this! managed to find where it goes; was a tricky little thing to refit!
I've taken a picture of the part reseated in the DC33; feel free to use it if anyone needs it!
-
Great info Bomski. We couldn't find that. :thumbsup: