Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Second Generation "The Ball" Dysons. => Topic started by: dwll on March 01, 2019, 02:25:27 pm

Title: DC40 Yoke - differ
Post by: dwll on March 01, 2019, 02:25:27 pm

Hello

Can someone help me... I need to replace a Yoke on my DC40.
I stripped it, found a secondhand DC40 yoke on Ebay... and then tried to fit it.

It seems there are slightly different yokes - is this correct?
The one from ebay has different slots for the wiring - and my version has 'vents' moulded - see image (mine on the left).
Anyone help me / confirm this. Just need to try and order the correct one!

Thanks Again.

Title: Re: DC40 Yoke - differ
Post by: dwll on March 01, 2019, 02:27:25 pm

model no.

Title: Re: DC40 Yoke - differ
Post by: __russ__ on March 01, 2019, 07:14:30 pm

Yes the standard DC40 and Erp version differ slightly so need to make sure you order the correct one.

Same story for the swivel lock arm just to make life difficult  ::)