Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Dyson DC01 (and DA 001) => Topic started by: MVacs on February 19, 2016, 06:52:14 pm
-
So a chap asks about a DC01 motor but says the one fitted in his machine doesn't look like either of the ones we have.
He sent me a photo for clarification.
[attachimg=1]
So whatever that is it isnt a Dyson motor.
Anyone recognise it?
Looking at the top plastic on there, I would suggest this had an Ametek in there originally. Serial is 840. Thoughts?
-
WTF!!! First time I have seen something new on a Dyson in ages :o
I presume it might be an oldie one if it's an Ametek, but that top plastic motor mount does look a bit similar to the YDK ones too
YDK Dc01's have female spade connectors and the motors have male ones, & Ametek DC01's have male spade connectors with the motor having female ports so I think that might be the easiest way to find out which kind of motor it should have if you check the connections on the motor :thumbsup:
I also noticed that DC01's serial numbers beginning with 700 have a YDK motor in and 702 are Ametek from personal experience
-
????????????????????????????????
-
Thats not right.
Knock a fiver off the bill and get him to post it back, see if they do actually fit and are cheap to buy?
-
that's not a dyson motor that's looks like a DIY job
but I could be wrong
-
He should have an Ametek DC01, I see male ports on the motor
-
He should have an Ametek DC01,
That is what I suggested to him.