Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Dyson DC04 => Topic started by: gordonmellor on March 29, 2021, 03:41:08 pm

Title: DC04 Filter Lid
Post by: gordonmellor on March 29, 2021, 03:41:08 pm

Hi
The handle on the lid to the filter has snapped off, I have managed to get a new lid but I am having problem finding the correct tool to undo the hinge, there are 2 screw, any ideas please?

Title: Re: DC04 Filter Lid
Post by: dysondestijl on April 01, 2021, 11:41:39 pm

I always remove the lid from the cyclone unit, where it hinges it is just popped in to place, but be careful not to break the hinge pivots off.
If you are replacing the whole top lid then voila. If you are just replacing the handle itself then you’ll need to undo the two torx screws and it will seperate

Title: Re: DC04 Filter Lid
Post by: gordonmellor on April 03, 2021, 01:01:23 pm

Many thanks for your helpful reply, all sorted.