Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Cylinder & Canister Dysons => Topic started by: dragoncurt on July 02, 2017, 03:49:47 am

Title: DC20
Post by: dragoncurt on July 02, 2017, 03:49:47 am

Hi,

I recently bought a Dyson DC20 (My first cylinder) and I must say I do like it. I and just wondering what tools can I get it to work with or is there an adapter for it. I was wondering to use the tangle free turbine with it or anything else.

Also since this is an oldish 8, 9 years old I was wondering is there a strip down video or guide I can use to see everything also if I ever need to put a new motor in it then I can.

Is this just a remodelled version of the DC19 that's what I since on some websites.

Thanks

Title: Re: DC20
Post by: __russ__ on July 02, 2017, 01:29:59 pm

Yes it's just the telescopic wrap version of the DC19.

It's pretty much the same as a DC08 so find a strip guide for on of those and you're sorted  :thumbsup:

Title: Re: DC20
Post by: dragoncurt on July 13, 2017, 09:16:11 pm

Oh, thank you.

Title: Re: DC20
Post by: MVacs on July 13, 2017, 10:10:49 pm

Would need to see a photo of the tool socket to comment as they differed.

Title: Re: DC20
Post by: dragoncurt on July 14, 2017, 01:20:24 am

Thanks

What do you mean by tool socket. Sorry and is it at the back of the cylinder where the tools fit in. Thanks

Title: Re: DC20
Post by: MVacs on July 14, 2017, 09:18:33 am

Tool socket being the recipient hole and surrounding area on the wand that the tools clip into.

Title: Re: DC20
Post by: dragoncurt on July 14, 2017, 12:05:31 pm

Oh, do you mean the tools which attach to the wand. I've uploaded a picture if that is what you mean I did not get it come with mine it was a used Ebay one. Thanks