Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Dyson DC01 (and DA 001) => Topic started by: beko1987 on September 03, 2015, 01:45:56 pm
-
I found myself with 2 DC01 Absolute+'s, so refurbished the less original one to sell it. All went well, until I came to test it when back together..
Right at the end there is an annoying squeak.
Just to test what the issue was, I removed the belt and brushroll
Squeak gone, so that means it's somethign to do with the brushroll...
So, out come the brushroll bearings (which I didnt grease as they span fine, this machine has had a few new parts on it in the not too distant past I think).
So, bearings apart, a quick squirt of
(https://lh3.googleusercontent.com/-0dJv977-cCA/Veg-19rx_GI/AAAAAAAAq7M/QdW5QdBbf64/s512-Ic42/upload_-1.jpg)
and back together, being careful to screw the baseplate down evenly, then I backed the screws off 1/4 a turn so it clamped and sealed, but didnt distort.
My assistant aided me in testing it afterwards
Job done! Went up for sale last night, 0% interest in it so far (but wasnt expecting much tbh, it's 'old innit'
(https://lh3.googleusercontent.com/-fhd2XA7F8pA/Veg_BPwlbbI/AAAAAAAAq7U/5nxcEqNJdE4/s512-Ic42/upload_-1.jpg)
(https://lh3.googleusercontent.com/-E3QhZ6oMJzw/Veg_LrsXo-I/AAAAAAAAq7c/z6iSvyq627c/s800-Ic42/upload_-1.jpg)
(https://lh3.googleusercontent.com/-TWNp3zhXvmI/Veg_SCmk7lI/AAAAAAAAq7k/CamScdRIaKo/s512-Ic42/upload_-1.jpg)
(https://lh3.googleusercontent.com/-jVJ84I7ZreA/Veg_WiWa4_I/AAAAAAAAq7s/rfdRZr3myMM/s800-Ic42/upload_-1.jpg)
(https://lh3.googleusercontent.com/-Ku9i6S9HWVc/Veg_ck_4z-I/AAAAAAAAq70/beQxoECBb1I/s800-Ic42/upload_-1.jpg)
(I kept the nice AB+ purple tools and the soleplate rubber...)
-
Good tip! I also like that brushroll, the purple bristles go quite well with the vacuum imo ;D
I also agree with the "old innit" thing, lol. I struggled to even sell a DC04 with all tools and a good clean for £25 :/ it eventually got sold with a lot of posting and bumping though
-
Dc04s dont seem to be an issue for me, can sell those easiky for £45-60 depending on how nice people ask for ir!
I know dc01s are not worth alot, and the first offer of £25 i get ill take. Dont buy dc01s with the intention to sell but I cant be dealing with duplicate machines, and I imagine posting a dc01 will be tricky and fraught with danger as even a mild speedbump could cause damage when taken at 69mph in a courier van...
-
Lol remember that dusty DC01 you were bidding on but ended up going for £30 I think? :P yet we struggle to sell refurbed DC01's! lol
-
and the first offer of £25 i get ill take.
I'll have any fixed soleplate ones at that that have a good and undamaged soleplate, bin flap, wand, motor and hose at that. Just strip those bits off and I'll send you a courier label. :icon_nod: