The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Recent Posts

Pages: 1 ... 8 9 [10]
91
But do I also need to order a replacement PCB main board as well? It's the later type, NPPSTXSNM-3. Is it possible that both have failed simultaneously: could the servo motor have blown and taken out the main board PCB with it?

Highly unlikely.
92
Introductions / Re: New Members - How did you find us?
« Last post by MVacs on April 10, 2024, 12:56:31 pm »
Good to have you here. :tiphat:
93
Introductions / Re: New Members - How did you find us?
« Last post by Sam1979 on April 10, 2024, 07:16:03 am »
Hello all. General searches looking for parts and repair advice kept leading me here, mostly use Sebos and a couple of Dysons, I think this has the most useful information in one place out of everything I've found. Cheers.   
94
Second Generation "The Ball" Dysons. / dyson up22 head
« Last post by bluebumble485 on April 09, 2024, 08:22:08 pm »
anyone sell a bearing for a up22 head please cant free one off
95
Second Generation "The Ball" Dysons. / Re: Dyson dc75 brushbar
« Last post by b21playa on April 09, 2024, 02:40:44 pm »
Much like a DC41, and there is strip down topics here on those.

Before you do, take the head off, put a meter on the two connectors from the machine, you are looking for circa 320v DC. Try and replicate the fault while watching the meter. That will tell you if it is the loom. It probably is, but that will tell you for sure before you strip it down.
Thank you very much  :thumbsup:
96
Second Generation "The Ball" Dysons. / Re: Dyson dc75 brushbar
« Last post by MVacs on April 09, 2024, 01:30:52 pm »
Much like a DC41, and there is strip down topics here on those.

Before you do, take the head off, put a meter on the two connectors from the machine, you are looking for circa 320v DC. Try and replicate the fault while watching the meter. That will tell you if it is the loom. It probably is, but that will tell you for sure before you strip it down.
97
Second Generation "The Ball" Dysons. / Re: Dyson dc75 brushbar
« Last post by b21playa on April 09, 2024, 05:27:38 am »
It sounds like the yoke loom.

(Attachment Link)

Take it apart and test that with a meter. They break inside.

Thanks. Is it hard to dissemble?
98
Suggestion Box / Re: Search Problem
« Last post by MVacs on April 08, 2024, 08:50:27 pm »
I've moved your post to an appropriate place.

For DC24s, look in >>this room<<.
99
Second Generation "The Ball" Dysons. / Re: Dyson dc75 brushbar
« Last post by MVacs on April 08, 2024, 08:43:14 pm »
It sounds like the yoke loom.

ila_rendered

Take it apart and test that with a meter. They break inside.
100
Sebo Vacuum Cleaners / Re: Sebo Felix Pet stopped working altogether while using
« Last post by MVacs on April 08, 2024, 08:40:01 pm »
Most likely the power cord has failed where it enters the handle.

Here's how to diagnose if it's just the flex at fault: plug it in and switch it on. Grasp the power cord a few inches from where it goes into the handle. Move it very gently and slowly up and down, side to side and maybe round in a circle. Try twisting it a little left and right. If the machine bursts into life, even for a moment while you are doing that, then it needs a replacement power cord. In this case, the cable has broken internally and a new one will fix it.

If that doesn't work, try doing the same a few inches back from the plug.  Very occasionally, they can fail where the wire goes into the plug.
Pages: 1 ... 8 9 [10]

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram