Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Other Dyson Products: Fans, Airblades, Hair Dryers, Washing Machines, etc. => Topic started by: RMS Robert on August 08, 2017, 11:09:21 pm
-
Im looking for any info, or preferably a pdf or download, of the dis-assembly of an Airblade AB01. I need to remove an old AB01 to replace it with a new AB14. Cheers, Robert
-
There are two Torx screws on the back of the front protrusion inside, where you put your hands, you undo those and the front cover comes off. From there, a simple electrical connector disconnects the supply. After that, depending who has fitted it, there should be two screws on the bottom of the back plate each side to the wall, the unit should then lift off its hanging bracket.
Does that help?
-
Thanks for your good advice. I had to remove four old AB01 units and replace these with AB14 units. I now have two AB01's in working order and two units fit for the breakers yard. Any offers. I am in Ireland.
-
Thanks for your good advice. I had to remove four old AB01 units and replace these with AB14 units. I now have two AB01's in working order and two units fit for the breakers yard. Any offers. I am in Ireland.
If you are able to package them up, we'd be interested. Shoot us a mail >here< (https://manchestervacs.co.uk/contact).