The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Recent Posts

Pages: [1] 2 3 ... 10
1
Hoover Vacuum Cleaners / Re: Hoover HL500HM
« Last post by MVacs on Yesterday at 01:05:57 pm »
You're unlikely to find one for those. Hoover is Chinese now as you'll know. We don't touch them for that kind of reason. They take ages to split down, even for cables.
2
Just had this problem.  The wire to the brush motor had broken at the hinge. Soldered in a short 2 wire length from just below the tube contacts to just before the brush head swivel. Not much room and took a while to accomplish. Works.
Had difficulty reassembling outer hinge cover (wheel mount) onto hinged tube.  Should have taken better pictures when disassembling.  :grinn:
3
Hoover Vacuum Cleaners / Hoover HL500HM
« Last post by Steve matthews on February 23, 2024, 11:32:21 am »
Hi All
I usually repair older vacuums and dysons but I've been asked to repair a Hoover HL500HM
The Main switch is stuck and the cable split. For the life of me i can not work out how to separate the plastic containment. Does anyone have a build diagram please
4
We now have our own V7 batteries in stock.



You can find them on our site here: Buy a Dyson V7 battery.

The trade can buy them in tens from our trade page here: Buy 10x Dyson V7 batteries trade

There is also an article on Dyson Medic >here< explaining why buying from us is a better option than eBay or Amazon.
5
Sebo Vacuum Cleaners / Re: SEBO X4 extra Newbie question wheel removal
« Last post by MVacs on February 14, 2024, 12:59:12 pm »
Wiggle and twist it off with a pair of pliers.

New wheels have it already in there under the centre cap, so they just pop on complete. You don't need to reinstall it as such.
6
Sebo Vacuum Cleaners / Re: SEBO X4 extra Newbie question wheel removal
« Last post by txhokie on February 13, 2024, 11:25:49 pm »
Hi all, just found this forum & thread as I'm looking to replace the broken wheels on my own Sebo (X4).  I managed to remove the axle assembly and pop off the wheel cap as explained by @MVacs.  What is the best way to remove the circular clip thing?   Thanks!

ila_rendered
7
First Generation "The Ball" Dysons. / Re: DC18 slim on 120V
« Last post by MVacs on February 13, 2024, 02:40:33 pm »
We tend to use a standard 120v box as you might use for power tools.

8
First Generation "The Ball" Dysons. / Re: DC18 slim on 120V
« Last post by MadeinHolland on February 11, 2024, 07:33:42 pm »
I am close to buying a USA import DC18.
It needs a converter to get used and will be hopeless if anything 120v breaks down?
Anyone any experience in using 120V at all here?
Cannot find any related topic so far.
Got it :
https://myalbum.com/album/3pZHPPzLLa8Ndb/?invite=0b4fe52b-36ea-44c2-b51a-c50d820cb165

9
First Generation "The Ball" Dysons. / DC18 slim on 120V
« Last post by MadeinHolland on February 08, 2024, 04:21:05 pm »
I am close to buying a USA import DC18.
It needs a converter to get used and will be hopeless if anything 120v breaks down?
Anyone any experience in using 120V at all here?
Cannot find any related topic so far.
10
Introductions / Re: New Members - How did you find us?
« Last post by MVacs on February 08, 2024, 01:26:31 pm »
Welcome Ronbur.  :thumbsup:
Pages: [1] 2 3 ... 10

 

Trade Dyson Spare Parts

 

 

Dyson Spare Parts

 

 

Freestanding Dyson Cordless Vacuum Stand

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

Buy a police truncheon

 

 

Instagram

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram