Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Cylinder & Canister Dysons => Topic started by: rrdb on January 31, 2012, 12:41:08 pm

Title: DC05 Motorhead - switch burnt out on the wand
Post by: rrdb on January 31, 2012, 12:41:08 pm
Is it possible just to get the wand hand/switch part and not the whole shebang, including tube etc, as that seems to be about £69 ?
Title: Re: DC05 Motorhead - switch burnt out on the wand
Post by: MVacs on February 01, 2012, 08:33:56 am
Is it possible just to get the wand hand/switch part and not the whole shebang, including tube etc, as that seems to be about £69 ?

The bits in those are not supplied separately - they made you buy the whole shebang. However, they are now obsolete as a new part. Only used ones remain unless there is some old new stock floating around anywhere.

We might have a used one if you want me to have a delve?
Title: Re: DC05 Motorhead - switch burnt out on the wand
Post by: rrdb on February 01, 2012, 10:11:59 am
Well, nice if you could ...

Else, I think it's a write-off !

Thanks

Richard
Title: Re: DC05 Motorhead - switch burnt out on the wand
Post by: MVacs on February 01, 2012, 12:54:39 pm
I'll have a look tomorrow as we are closed today.
Title: Re: DC05 Motorhead - switch burnt out on the wand
Post by: rrdb on February 01, 2012, 01:01:28 pm
Ok, cheers ...
Title: Re: DC05 Motorhead - switch burnt out on the wand
Post by: MV Claire on February 03, 2012, 01:30:19 pm
All we have is a used one. Original part number 902700-01. It is complete like this:

[attach=1]

Retail is [was] about £65 - a used one is worth £30 as they are now very rare and obsolete, and most of them go to Australia where those machines are still abundant.

Send me a PM or an email if you want to order it.