Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Other Dyson Products: Fans, Airblades, Hair Dryers, Washing Machines, etc. => Topic started by: chwyrligwgan on February 29, 2016, 05:26:47 pm
-
my dyson cr01 washing machine comes up with message not filling with water
can you suggest a fix
the display panel is working 100%
the main circuit board is 100%
the inlet valve is 100%
I have checked for blockages with hoses and inlet filters all seems ok
also checked rubber vacuum tube to display panel seems ok
any suggestions gratefully appreciated
many thanks
-
Inlet solenoid valve??
-
inlet solenoid valve is working 100%
-
Is it filling up but still giving the error message, or not actually filling as it tells you?
-
it is filling with water
but only in short bursts and not to the required level
-
MVac, you're the professional here!
-
MVac, you're the professional here!
Not so much on the washers. There are a couple of blokes that will pop by if PM'd though.
-
does anyone have an idea what the problem could be with this dyson washing machine
see start of this message for problem
I am still scratching my head over this one
-
I recommend sending a link to the topic by PM to this member (https://manchestervacs.co.uk/DysonForum/index.php?action=pm;sa=send;u=694) and this member (https://manchestervacs.co.uk/DysonForum/index.php?action=pm;sa=send;u=674). Those chaps really seem to know their eggs with these machines.
-
You're in the right place, you'll have it up and running again in no time!