Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Dyson DC14, DC17, DC27, DC28 and DC33 => Topic started by: Tonymini145 on February 14, 2016, 09:06:55 pm
-
Just overhauled a DC14 hepa as far as I'm aware it was one of the newer ones however every single 14 I've stripped has had a YDK motor anyone shed some light as to why this one has a Samsung motor ?
-
Serial number
-
Can I see a pic of the samsung motor?
-
I don't have any I'm affraid as I was in abit if a rush to get it back to the lady that owned it
-
No probs
I had a Dyson DC14 all floors from Jan 2008, which blew last month and it had a YDK motor
-
That's what I mean I've stripped loads and loads of 14s replaced a fair amount of motors and never have I come across this Samsung motor
-
I believe Dyson fitted them when they burnt out because they last longer? ButI thought panasonic motors lasted longer because DC25's use panasonic motors and they are built like tanks and never burn out like DC14's/33's with their YDK motors
-
All I really want to know is can I swap it out for a YDK with no issues as this Samsung motor is sparking
-
Yes you can :)
-
Doing the same myself today.
The rubber motor mounts are different .
I have a spare YDK MOTOR FANCASE SEAL but not a YDK
MOTOR BEARING MOUNT. The Samsung MBM fits onto the YDK (MTR,240kk) motor but is it ok to use?
-
Sorry just found the post where it says I can reuse both rubbers on the YDK motor.
-
I have come across loads of Samsung mainly in dc14 if I remember ,maybe tahts what dyson replace with ??
-
Just got it back in to fit a YDK and here's the old Samsung motor
-
:o I have never seen one with anything but a YDK
-
:o I have never seen one with anything but a YDK
Me either and I've refurbed/motor swapped at least 100 DC14
-
I think Sam (Beko) had a samsung motor in his late model white DC14 all floors!
-
I think Sam (Beko) had a samsung motor in his late model white DC14 all floors!
Horrible motor in my opinion the brushes are like new and the motors very clean yet it sparks like a :censored: lol
Still came out nice and clean
-
Did I? Top remembering!
-
Did I? Top remembering!
:biglaugh: haha even beko can't remember very good memory
-
Lmaoo :)) Thanks ;D :king:
-
I have come across about 5 or 6 DC14's with the Samsung Motor in them and all working. However, every one of them I have taken out sparks like crazy, works okay just sparks a lot.
-
I have also just stripped a dc14 all floor and found a samsung motor instead of a YDk can i replace with a YDK and use the rubber case as it states samsung only on it
-
You can use the outer case but you have to use a YDK Rubber seal as the Samsung one wont fit on the YDK Motor.
-
Thank you i will sort that when the YDK motor arrives thank you for you advice