Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Cylinder & Canister Dysons => Topic started by: bluebumble485 on January 15, 2012, 07:58:51 pm
-
hi its me again, i came to you for help how to strip a turbine tool
i have been doing this fine but i now have 2 that spin fine but stop when put on the floor on carpet
is there a tip to make it spin many thanks
steve
-
two things go wrong with these, either he turbine inside the unit shatters or the bushes in the axle that drives the brushes become so clogged with dirt that they can't spin any more. I will try and post picks again of how to undo the unit and clean / repair it
-
Having the same issue on my turbine head from dc23..can't figure out how to get inside from the opposite side. That last screw seems unreachable.
-
two things go wrong with these, either he turbine inside the unit shatters or the bushes in the axle that drives the brushes become so clogged with dirt that they can't spin any more. I will try and post picks again of how to undo the unit and clean / repair it
Hi tony here ,Did you put up any picks??? on how to repair it ? as I can not find them.Thanks for your time.
Cheers Tonynelson :tiphat: