Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Second Generation "The Ball" Dysons. => Topic started by: Sammyj14 on July 31, 2015, 07:13:24 pm
-
Hope someone can help me, my DC40 brush bar stopped turning so Found this forum and that I needed a yoke cable assy.
Ordered and it arrived today. Promptly dismantled dyson, replaced yoke cable
. However once put all back together I now have 3 bits left
I have no clue where they go!! This plastic clear thing fell out so did not see where it fell from
I have studied the breakdown of parts ( found on this Web also ) but still can't work out where
It these go, can any one help please??! I will attach photos to show the parts I'm referring too
-
The clear cog thing with spikes sticking out is part of the yolk, theres also a white circular thing that holds it in, these two bits are held in by a screw. Take the yolk off and face the front of it, on the left side internally it should go there with the screw hole :)
-
I will attach photos to show the parts I'm referring too
Do that.
Photo tutorial >>here<< (https://manchestervacs.co.uk/DysonForum/index.php/topic,506.0.html).