Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Cylinder & Canister Dysons => Topic started by: The Doodster on October 17, 2015, 09:51:11 am

Title: DC05 Motor
Post by: The Doodster on October 17, 2015, 09:51:11 am

Just stripped a dead DC05 and found this motor in it, all others I've done have had a YDK type motor. Can a YDK be put in and do I need anything else to fit or do I need to change like with like and what type is it ?

Thanks  :thumbsup:

[attachimg=2]

Title: Re: DC05 Motor
Post by: Parwaz7862 on October 17, 2015, 10:32:06 am

You will need need new motor rubbers for the YDK motor, and maybe a new bucket, but I'm not 100% sure on that though. Hope this helps ;D

Title: Re: DC05 Motor
Post by: The Doodster on October 17, 2015, 10:45:34 am

Thanks for the answer Parwaz  :tiphat:

I'm sure someone will be along shortly with a definitive answer  ;)

Title: Re: DC05 Motor
Post by: The Doodster on October 17, 2015, 10:56:52 am

It seems I have the Panasonic SDS1204SD  motor, just need to know what parts I need to convert to get it working (or get a replacement motor if its cost effective.

Title: Re: DC05 Motor
Post by: Parwaz7862 on October 17, 2015, 12:22:17 pm

These panasonic motors are quite rare, my DC05 motorhead has one :) Most DC05's have the YDK

Title: Re: DC05 Motor
Post by: The Doodster on October 17, 2015, 02:16:10 pm

LOL....Found the answer in the sticky above  :'(

https://manchestervacs.co.uk/DysonForum/index.php/topic,334.msg662/topicseen.html#msg662

https://manchestervacs.co.uk/DysonForum/index.php/topic,334.msg662/topicseen.html#msg662 (https://manchestervacs.co.uk/DysonForum/index.php/topic,334.msg662/topicseen.html#msg662)

Title: Re: DC05 Motor
Post by: beko1987 on October 18, 2015, 12:06:41 am

(http://cdn.meme.am/instances2/500x/2470116.jpg)

Title: Re: DC05 Motor
Post by: Parwaz7862 on October 18, 2015, 12:19:19 am

LOL ;D I think I laughed a bit more than I should have at that