Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Dyson DC01 (and DA 001) => Topic started by: MVacs on September 06, 2011, 05:50:44 pm

Title: Dyson Discontinue Support and Parts Supply for the DC01 and DC02
Post by: MVacs on September 06, 2011, 05:50:44 pm: Today, I located a source of after-market wands for Dyson DC01's. I always like to make sure we are cheaper than Dyson and competitors so I went to the Dyson website to see what they charge for a DC01 wand. I was surprised to see this message:

Quote
Important Notice

Dyson machines are built to last. However, from the beginning of July 2011 we will no longer be able to supply spare parts, or carry out service or repairs for DC01 and DC02 machines.

There are still many thousands of DC01's out there, so if you have one there is no need to worry. We will continue to carry everything for them. And now, we have brand new wands at £29.99 including delivery. :thumbsup:
Title: Re: Dyson Discontinue Support and Parts Supply for the DC01 and DC02
Post by: Angus Black on December 21, 2011, 10:07:14 am: I am having difficulty finding YDK motors and fixed sole plates for DC01's new now. Nobody seems to have them in stock any more and Dyson wont supply them.
Title: Re: Dyson Discontinue Support and Parts Supply for the DC01 and DC02
Post by: MVacs on December 31, 2011, 06:18:13 pm: Quote from: Angus Black on December 21, 2011, 10:07:14 am
I am having difficulty finding YDK motors and fixed sole plates for DC01's new now. Nobody seems to have them in stock any more and Dyson wont supply them.

Indeed. We have some used YDK DC01 motors and I think *one* fixed sole plate left - also used. Everything else we have.
Title: Re: Dyson Discontinue Support and Parts Supply for the DC01 and DC02
Post by: MVacs on February 17, 2012, 08:04:55 pm: New DC01 brushrolls are getting very low now. They have been on *backorder* since before Christmas, and my bet is they will never arrive, as the ones we have we believe to be OEM and the factory isn't making them for Dyson now.

On the bright side, we have several boxes of used ones still, and we can now get the bearings for them. So when we run out of brushrolls, we will put bearings and used brushrolls on the page instead. ;)
Title: Re: Dyson Discontinue Support and Parts Supply for the DC01 and DC02
Post by: MVacs on February 17, 2012, 08:06:27 pm: Quote from: Angus Black on December 21, 2011, 10:07:14 am
I am having difficulty finding YDK motors and fixed sole plates for DC01's new now. Nobody seems to have them in stock any more and Dyson wont supply them.

We are out of both now as per our news post (https://manchestervacs.co.uk/DysonForum/index.php/topic,541.msg1591.html#msg1591) here.
Title: Re: Dyson Discontinue Support and Parts Supply for the DC01 and DC02
Post by: MVacs on June 28, 2012, 11:30:35 pm: We are now running low on used DC01 bin catch flaps with the HEPA filter hole (new ones are obsolete). They look like this:

[attachimg=1]

We have taken them off the site and only have a handful left; after which, we will operate a waiting list. Contact us if you need one.
Title: Re: Dyson Discontinue Support and Parts Supply for the DC01 and DC02
Post by: MVacs on August 05, 2013, 11:41:38 pm: We have come by a handful of brand new DC01 Ametek motors. If you happen to need one, you are welcome to contact us.