Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Cylinder & Canister Dysons => Topic started by: stan.kirklands on April 12, 2019, 12:27:42 pm

Title: DC39 Post Motor Filter Removal
Post by: stan.kirklands on April 12, 2019, 12:27:42 pm

I want to replace the post motor filter on my Dyson 39. I have got the motor out but can't find out how to remove the filter. There are two brackets set down in holes on either side of the body and there is a post which says to prise them open but how?

Title: Re: DC39 Post Motor Filter Removal
Post by: MVacs on April 19, 2019, 11:19:21 am

I’ve moved your topic into the correct room for you.

If you have a look down the aged topics in this room you will find this subject has been covered extensively in the past. In one of the topics the chap insists on calling it a CRU just to confuse you, but there is a lot of info on that topic.