Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Other Vacuum Cleaners & Site Suggestions => Discussion About Other Vacuum Cleaners & Appliances => Topic started by: brett83 on November 24, 2015, 10:12:57 pm
-
Has anyone had any experience fixing these before?
I have one in for repair and I am absolutely baffled. It came in as the owner suspected the mai motor was noisy and smelling of electrical burning. I switched it on to test and it went 'bang' sparked out the side and popped the fuse in the plug.
I happened to have a scrap 9200 E which was faulty because it wasn't spraying water. All the parts were the same, so I swapped the motor out, the 2 EMI filters and the PCB in the handle, which had definitely blown, because there was black soot inside the plastic handle near it.
Switched it on for a second time and it went bang again. >:( >:( >:( >:( >:( >:( >:(
Really confused now !!
Any help would be muchly appreciated.
Brett
-
Well for me I had a dodgy Dyson DC14 once (burnt out) and when I unplugged it I swear I got an electric shock from the plug even though it wasn't plugged in. I thought that this problem is guaranteed to be resolved if I swap ALL electrics. So a new motor, cable and switch (in a simple circuit of a Dyson) solved it beautifully.
So what other electrical parts are in the Bissell? It is probably the fault of that/those part(s)
Personally I am not really sure if it's worth repairing it because after all, it's a Bissell. But hey, nice project and was once the latest model! ;)
-
I hear the word Bissell, and I run away....
-
Lol btw Bissell sell their vacuums at such low prices that when the vacuum breaks the consumer would just buy another one, for example the Bissell Easyvac was like £30 in Asda! A new filter costs like half price of the freaking vacuum lol
-
You don't mention replacing the cable, it's reasonably common for mains flexibles to go where they enter a machine. If the wires are touching, bang & the fuse blows.
-
I fixed a dc33 last night with just this issue!
-
Hey Sam: Yep, first thing I look at for that sort of problem.
How are the family doing ?
-
Not bad. Currently standing outside evas nursery waiting for them to open...
-
Cool, glad everyone's OK :thumbsup:
-
It's actually a carpet cleaning machine.
Cable test out ok. I think it might be the brush bar motor but can't get it out the belt side is stuck on. Going to need a hack saw :-)
-
Probs a hidden screw, had that with my Electrolux Z61A workzone
-
It doesn't really matter what machine it is, if it's fed with a flex & moveable in use. Testing the flex is simple, takes very little time & can save loads of aggravation.
If you've got the machine body open & you can get at the brush bar motor connections, disconnect the motor connections and try again.