Dyson & Sebo Vacuum Cleaner Repair & Advice Forums
Dyson Models => Dyson DC04 => Topic started by: AliB on January 22, 2015, 09:40:14 am
-
Hello
My DC04 pre motor filter is clogged solid after one use, what could be causing this problem, it doesn't look like its missing any rubber seals or o rings
Thanks in advance
Al
-
Hello
My DC04 pre motor filter is clogged solid after one use, what could be causing this problem, it doesn't look like its missing any rubber seals or o rings
Thanks in advance
Al
Have you got the bin insert sitting in the bottom of the clear bin?
-
There should be a thin rubber o ring at the bottom of the inner cyclone, and a rubber cap at the top that the inner cone seals onto.
Is also a rubber gasket underneath the main housing where the clear bin meets the top, but if that was missing you would have no suction.
-
Have you got the bin insert sitting in the bottom of the clear bin?
Or is it inserted upside down?