Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Cylinder & Canister Dysons => Topic started by: The Doodster on May 04, 2015, 12:15:28 pm

Title: DC08 Turbo Head Pipe
Post by: The Doodster on May 04, 2015, 12:15:28 pm

Hi All,
           I have a split pipe on a DC08 that I'm re-furbishing, I cant seem to find one to replace it  :'(  ....any ideas where I can get one from ?

[attachimg=3]

Title: Re: DC08 Turbo Head Pipe
Post by: beko1987 on May 04, 2015, 12:42:58 pm

A scrap head...

Or find some silver insulation tape and tightly wrap it!

Title: Re: DC08 Turbo Head Pipe
Post by: MVacs on May 04, 2015, 01:42:26 pm

I'll see if we have a scrap head tomorrow if I get chance.  :icon_nod:

Title: Re: DC08 Turbo Head Pipe
Post by: Madrat on May 04, 2015, 04:56:55 pm

Silver duck tape.

I have had this problem a few times have always wondered if you could replace it with a bit from a scrap hose?

Title: Re: DC08 Turbo Head Pipe
Post by: The Doodster on May 04, 2015, 05:11:54 pm

Thanks guys, I don't want to use duct tape as it's a re-sale machine so I always do these properly.

MVACS, thanks, if you have the part then \I'll have it...thanks  :thumbsup:

Title: Re: DC08 Turbo Head Pipe
Post by: The Doodster on May 05, 2015, 12:50:51 pm

Thanks for all the replys, got the pipe I need from Claire at MVacs 👍

Title: Re: DC08 Turbo Head Pipe
Post by: MV Claire on May 05, 2015, 12:51:42 pm

Doodster check your PM's.  Regards Claire [edit - I see you already did].

Title: Re: DC08 Turbo Head Pipe
Post by: Parwaz7862 on May 05, 2015, 10:57:27 pm

Quagmire seems happy that the DC08 hose has been replaced! XD