Dyson & Sebo Vacuum Cleaner Repair & Advice Forums

Dyson Models => Cylinder & Canister Dysons => Topic started by: bleak basher on September 26, 2012, 10:57:59 PM

Title: DCO8 TW
Post by: bleak basher on September 26, 2012, 10:57:59 PM
Hi all, first posting so please be gentle with me!
My query is regarding a DC08 Carpet pro telescopic wrap I have been given, but without any type of floor tool.
Anyone have any idea of what floor tool will fit it as most that fit a non wrap DC08 seem to state "will not fit TW models", or an adaptor that Dyson seem to produce loads of, that will enable me to get a more commonly used head to fit the telescopic hose?
Title: Re: DCO8 TW
Post by: MVacs on September 26, 2012, 11:27:28 PM
Hello, and welcome to the site.

Some of the cylinder applications are unnecessarily complex. Sometimes even Dyson themselves get it wrong!

If you can post a photo of the end of the wand where the floor tool clips in, I may be able to tell you what will fit it.
Title: Re: DCO8 TW
Post by: bleak basher on October 01, 2012, 08:25:46 PM
Thank you for reply,
Been do some digging and it would appear that the floor head for the DC08 will fit the hose on the DC08 TELESCOPIC WRAP, but the hose will not wrap correctly with the DC08 head left attached because the retaining lug on the TW handle part wil not fit in it's retainer...

Does this sound correct?

Have taken a couple of pics, and will load up when next in office.