The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson Washing Machine Fault Codes  (Read 4614 times)

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4795
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Dyson Washing Machine Fault Codes
« on: August 21, 2013, 09:07:44 PM »
F1: Washing machine drum is overloaded

F2: Out of balance load detected

F3: Washing machine's outer door detected open

F4: Washing machine's inner door detected as open

F5: Washing machine has not drained

F6: Washing machine has not filled with water

F7: Washing machine motor tacho open circuit

F8: Washing machine has overfilled with water

F9: Fault code not used

F10: Overspeed detected, motor triac failure

F11: No motor action detected (this usually means you need a new main power board).

F12: Invalid temperature sensor reading

F13: Washing machine not heating or heating not detected

F14: Flooding

F15: Gear change failure - too slow

F16: Not stopping - motor triac failure

F17: Not used

F18: Gear change failure - too fast

Offline alextill

  • Member
  • Posts: 9
Re: Dyson Washing Machine Fault Codes
« Reply #1 on: September 27, 2013, 03:52:17 PM »
Many thanks for this Information... Great site.

 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram