The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC07 Belts  (Read 1349 times)

Offline trkbyron

  • Member
  • Posts: 8
  • Country: gb
  • Gender: Male
DC07 Belts
« on: May 07, 2014, 08:39:34 PM »
Hi,
Why can I not find a genuine Dyson brushroll belt to clutch for the DC07 (All floors).I am guessing that Dyson consider the replacement of this to be beyond most DIY'ers but are still prepared to sell the full clutch unit which includes the new belt for around twenty quid!!!.Has anyone found a genuine belt for this job or do we just use an aftermarket one which seem easy to come by?Would also love to buy from anyone a genuine brushbar endcap which found its way into the dustbin sometime last week and is now helping to decorate our local landfill waste site :'(.The brushbar was only fitted last year and I don't go mad over buying the full unit again for needing such a small part of the assembly.Any help greatly appreciated.
Tim

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4642
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: DC07 Belts
« Reply #1 on: May 08, 2014, 09:37:02 AM »
You can get a genuine clutch to motor belt (902514-01), but for the pair you want the after-market ones - they are OK.

The genuine end cap isn't available on its own, however, if you were ordering anything from us, we could bung a used one in for free.

Online beko1987

  • Member
  • Posts: 3624
  • Country: gb
  • Gender: Male
  • Let's take it apart!
    • My blog
Re: DC07 Belts
« Reply #2 on: May 08, 2014, 11:19:41 AM »
Aftermarket qtex belts are fine, used 20-30 sets and they transform the machine.

Clutch syripdown guide is in the how to section if you need help!
Collector and restorer of vintage vacuums, Dyson Appreciator! Come and see my blog, where I am uploading all my mountains of brochures, manuals and other vacuum cleaner paperwork, and also my youtube channel @beko1987!

Offline trkbyron

  • Member
  • Posts: 8
  • Country: gb
  • Gender: Male
Re: DC07 Belts
« Reply #3 on: May 08, 2014, 03:34:15 PM »
 ;)
Thanks for the help guys.I have ordered a pair of the aftermarket belts for the DC07.Claire has popped in the brushbar end cap as well :bow:
I do have a genuine clutch to motor belt so will keep the extra one as a spare.Nothing looks badly worn now I have the clutch apart,not bad for around 13 years with some pretty hard use at times :grinn:
Tim.

DC07 Spare Parts


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram