The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Too much suction from no suction cure.  (Read 1130 times)

Offline kenny444

  • Member
  • Posts: 1
  • Country: gb
  • Gender: Male
  • Not very at all
Too much suction from no suction cure.
« on: October 28, 2014, 01:13:08 PM »
I have a DC07 which was not new to me, it has been really bad at picking up. So I set about working through everything I could to remove any air leaks and/or blockages. I watched all the Youtube videos but nothing worked. But it is going now and lifts the carpet if you slow down or stop. ****The answer was to swap the root cyclone****. Ours was dirty and although cleaned and washed it did not improve, all I can suggest is this, if you have a sucker and a non-sucker swap the cyclones over and see if the suction comes with it. The problem I suspect was a build up of debris in the area that I could not seewithin the cyclone! Hope this is of use. Kenny444
Always happy to learn from those who know better and I hope you all live longer than me.

DC07 Spare Parts


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram