The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Dyson DC07  (Read 1087 times)

Offline Big Bob

  • Member
  • Posts: 1
Dyson DC07
« on: February 12, 2015, 08:33:45 PM »
Hi All. I have a DC07 and every time I switch it on the 13amp fuse blows.
Has any one got any ideas?

Online Madrat

  • Member
  • Posts: 2702
  • Country: england
  • Gender: Male
Re: Dyson DC07
« Reply #1 on: February 12, 2015, 10:54:02 PM »
cable shorting somewhere

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4647
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: Dyson DC07
« Reply #2 on: February 12, 2015, 11:48:06 PM »
cable shorting somewhere

What Madrat said. It likely wants a new flex. I suppose a motor is also a possibility, but a faulty motor seldom blows the fuse.

Online macman

  • Member
  • Posts: 173
  • Country: gb
  • Gender: Male
Re: Dyson DC07
« Reply #3 on: February 13, 2015, 09:49:47 AM »
Do a continuity test on the flex first. If ok then check the motor.
I recently changed a motor on a DC19 where the brushes were obviously severely burnt. However it still didn't run with a new motor fitted until I changed the fuse as well-so it can happen.

DC07 Spare Parts


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram