The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: Which Motor for DC04 Brush Control  (Read 2618 times)

Offline lancepar

  • Member
  • Posts: 1
Which Motor for DC04 Brush Control
« on: August 11, 2011, 11:31:34 AM »
I have read the post on the two types of motor fitted to this model.

However my question is can a YDK YV-2200 be used instead of a YDK YV-551.  I think it can but would like conformation.

Sellers of both say they both fit the DC04 B/C so what is the difference if any apart from the price?

Cheers

 8)

Offline Dyson Tech

  • Global Moderator
  • Member
  • *****
  • Posts: 307
  • Country: gb
  • Gender: Male
Re: Which Motor for DC04 Brush Control
« Reply #1 on: August 18, 2011, 01:52:00 AM »
However my question is can a YDK YV-2200 be used instead of a YDK YV-551.  I think it can but would like conformation.

On DC04's, any YDK from another DC04, 7 or 14 will fit any DC04 that was originally fitted with a YDK. DC04's originally fitted with an Ametek motor will need new motor rubbers and plastic sealing ring to fit a YDK in there.

I *think* the 2200 is from a DC14 originally (we don't reference on YDK numbers), but it will fit just fine.

While you are here, don't forget to vote in our poll here: https://manchestervacs.co.uk/DysonForum/index.php/topic,31 and feel free to jump in on any topics to help out or have some banter.  :thumbsup:
Manchester Vacs Dyson and Sebo Engineer
We expect that by seeking advice here, you are competent enough to be able to make any electrical installations safely and in a safe and legal manner in your jurisdiction. If you are in any doubt whatsoever, do consult an electrician. You accept/implement any advice you read at this site at your own risk. Dyson and Sebo Spares and Service

Offline Elgin

  • Member
  • Posts: 731
  • Country: england
  • Gender: Male
Re: Which Motor for DC04 Brush Control
« Reply #2 on: December 31, 2016, 04:39:06 PM »
However my question is can a YDK YV-2200 be used instead of a YDK YV-551.  I think it can but would like conformation.

On DC04's, any YDK from another DC04, 7 or 14 will fit any DC04 that was originally fitted with a YDK. DC04's originally fitted with an Ametek motor will need new motor rubbers and plastic sealing ring to fit a YDK in there.

I *think* the 2200 is from a DC14 originally (we don't reference on YDK numbers), but it will fit just fine.

While you are here, don't forget to vote in our poll here: https://manchestervacs.co.uk/DysonForum/index.php/topic,31 and feel free to jump in on any topics to help out or have some banter.  :thumbsup:
Yes, Any YV511, YV2200 will fit, but a YV2200 is a 1400w so it will have slightly more power than the original YV511 1200w,
The YV511 was used on the Clutched/brushcontrol dc04 but can also be used in the nonclutched dc04
the YV2200 was originaly fitted onto the DC07 and then again used in the DC14

DC04 Spare Parts


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram