The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: help! Dyson dc19 motor  (Read 2636 times)

Offline dannysdysons123

  • Member
  • Posts: 24
  • Country: gb
  • Gender: Male
help! Dyson dc19 motor
« on: January 29, 2021, 11:10:25 am »
I've had a Dyson dc19 in for a repair because it smelt bad, they used it heavily for D.I.Y and I gave it a full refurb (watched beko1987's tutorial). I don't think its a dc19 t2 because its ratings plate says its a dc19 Db (which I think means decibel because it has bits of foam on the end of the exhaust. When I first plugged it in it stank and it sounded awful so I striped it and cleaned it and ordered a new post motor filter (it desperately needed it). I put it all back together and plugged it in (with no filters because I only needed to know what the motor was like) and it made the exact same horrible noise but with a lot of little bangs which was its motor blowing up (if it didn't have any filter covers etc. I probably would have seen sparks and flames).It was probably sparking before it was just blocked out but the dust and dirt that was on the post motor filter.

 So it needs a new motor, where is the best and cheapest place to purchase one?

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 6424
  • Country: gb
  • Gender: Male
    • Manchester Vacs - The Independent Dyson Specialists
Re: help! Dyson dc19 motor
« Reply #1 on: January 30, 2021, 07:13:59 pm »
where is the best and cheapest place to purchase one?

Best and cheapest are not the same thing.

Ours are >here<.

In terms of cheap ones, have a read of >this<.

Dyson Cylinder Spare Parts



Trade Dyson Spare Parts



Dyson Spare Parts



Freestanding Dyson Cordless Vacuum Stand



Buy a Dyson DC04 Wand Handle





Buy a police truncheon




Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacs on Instagram