The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DC03..no suction from wand  (Read 4001 times)

Offline aceone

  • Member
  • Posts: 25
DC03..no suction from wand
« on: December 19, 2011, 10:45:58 PM »
Hi   i have a Dyson DC03,not a model i am not familiar with at all.,The problem being,i can use the vacuum in the upright position and it works well,but when i take the wand out to use,there is zero suction,have you any idea where the problem might be
         thankyou
                    :'(

Offline Dyson Tech

  • Global Moderator
  • Member
  • *****
  • Posts: 307
  • Country: gb
  • Gender: Male
Re: DC03..no suction from wand
« Reply #1 on: December 20, 2011, 03:16:58 PM »
Take out the cassette at the bottom of the hose and see if this seal is there - we can go from there.

Manchester Vacs Dyson and Sebo Engineer
We expect that by seeking advice here, you are competent enough to be able to make any electrical installations safely and in a safe and legal manner in your jurisdiction. If you are in any doubt whatsoever, do consult an electrician. You accept/implement any advice you read at this site at your own risk. Dyson and Sebo Spares and Service

Offline aceone

  • Member
  • Posts: 25
Re: DC03..no suction from wand
« Reply #2 on: December 24, 2011, 06:32:16 PM »
Just had a look,and the seal is present!!!! thankyou,....and happy xmas to you all at "Manchester Vacs" :thumbsup:

Dyson Cylinder Spare Parts


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram