The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: DCO8 TW  (Read 1826 times)

Offline bleak basher

  • Member
  • Posts: 4
DCO8 TW
« on: September 26, 2012, 10:57:59 PM »
Hi all, first posting so please be gentle with me!
My query is regarding a DC08 Carpet pro telescopic wrap I have been given, but without any type of floor tool.
Anyone have any idea of what floor tool will fit it as most that fit a non wrap DC08 seem to state "will not fit TW models", or an adaptor that Dyson seem to produce loads of, that will enable me to get a more commonly used head to fit the telescopic hose?
Thanks

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4646
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: DCO8 TW
« Reply #1 on: September 26, 2012, 11:27:28 PM »
Hello, and welcome to the site.

Some of the cylinder applications are unnecessarily complex. Sometimes even Dyson themselves get it wrong!

If you can post a photo of the end of the wand where the floor tool clips in, I may be able to tell you what will fit it.

Offline bleak basher

  • Member
  • Posts: 4
Re: DCO8 TW
« Reply #2 on: October 01, 2012, 08:25:46 PM »
Thank you for reply,
Been do some digging and it would appear that the floor head for the DC08 will fit the hose on the DC08 TELESCOPIC WRAP, but the hose will not wrap correctly with the DC08 head left attached because the retaining lug on the TW handle part wil not fit in it's retainer...

Does this sound correct?

Have taken a couple of pics, and will load up when next in office.

 

Dyson Cylinder Spare Parts


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram