The World's #1 Vacuum Cleaner Advice, Repair, Discussion & Information Forum

Author Topic: dc05  (Read 2936 times)

Offline carlos

  • Member
  • Posts: 13
dc05
« on: October 15, 2012, 10:28:47 AM »
 :snivel:
          hello my dyson buds
                                           have just replaced motor in my dc05 the motor is 1600w the old one was 2100w. have noticed that the air flow expels from  the motor across the cable winder and gets very hot is this normal.dco5
                                                                           thanks carlos 

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4782
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: dc05
« Reply #1 on: October 15, 2012, 03:21:26 PM »
Surely the hot air expels through the motor casing and through the post motor filter?

Offline carlos

  • Member
  • Posts: 13
Re: dc05
« Reply #2 on: October 15, 2012, 05:09:28 PM »
yes the hot air does expell through all the proper places have taken dc05 to bits so no blocked air ways but cant work out why its getting so hot.
         carlos

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4782
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: dc05
« Reply #3 on: October 15, 2012, 07:58:23 PM »
The washable filter is clean?

Is it getting hot enough to cut out?

Offline carlos

  • Member
  • Posts: 13
Re: dc05
« Reply #4 on: October 16, 2012, 09:03:05 AM »
yes
    it has cut out out on me once    thinking maybe replacement motor is wrong size cant see how this could be a problem thou
                                                                   carl

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4782
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: dc05
« Reply #5 on: October 16, 2012, 09:07:34 AM »
Is it fitted with a HEPA filter? Is the washable filter clean?

Offline carlos

  • Member
  • Posts: 13
Re: dc05
« Reply #6 on: October 16, 2012, 09:49:09 AM »
 :'(
    yes has heppa filter and washed out filter

Online MVacs

  • Administrator
  • Member
  • *****
  • Posts: 4782
  • Country: gb
  • Gender: Male
    • Manchester Vacs -- The Independent Dyson Specialists
Re: dc05
« Reply #7 on: October 16, 2012, 08:08:12 PM »
If you have swapped the motor, it will need a new HEPA filter. If you still have the old one in there, take it out and see how it runs without it.

Dyson Cylinder Spare Parts


 

 

Dyson Spare Parts

 

 

Sebo Vacuum Cleaners

 

 

Buy a Dyson DC04 Wand Handle

 

 

 

 

The Dyson Medic Blog

Dyson Spares, Parts, Advice   Follow us on Twitter

Manchester Vacson Google+

Manchester Vacs on Instagram