Lux Powerprof compatible Sebo ET-2 swivel neck

[CountVacula]

• Tweet

Hi all.  Lux sold a commercial tank vacuum called the Powerprof that came with Sebo ET-2 power brush.  The swivel neck in these is unique.  It uses round contacts in an oval shaped plug rather than the spade contacts in a square plug used on Sebo hoses and wands.  Does anybody know the part number for that neck and where I might find one?  None of the Sebo sites show this part nor does any Lux site I can find.  Thanks.

[MVacs]

If the head was made by Stein (Sebo), only they will know. As its a very obscure part, I'd email them from here with a photo and ask for a part number. If you have a part number, I could put it on our order and send it over to the US.

[CountVacula]

To my surprise I found the part in Australia and it should be on its way to the US soon.  In the fullness of time I am going to fit my Aerus Guardian Platinum with the hose, wands and power nozzle used on the Sauber SI-200 Intelligence instead of the 1990s vintage Electrolux USA hardware it is sold with in the US.

[MVacs]

Excellent news. Sebo seems very popular in Australia. We send bits and pieces there, but there seems to be quite a few decent dealers out there.

[CountVacula]

Keep in mind this particular ET-1 was sold with the Sauber SI-200 Intelligence a shop in Australia is parting out and the neck was only used by Sauber and by Lux with their Powerprof commercial tank vacuum.  It's not a standard Sebo part so that is what makes it tough to find. Sebo in the US didn't know anything about either machine. In Europe a Lux Intelligence would have come with a different power nozzle, their PB-1.  I don't know if Lux sold the Powerprof in UK.  It would go head to head with Numatic.